What is the fish plate connection?
A fish plate connection is a structural joint used in railway engineering to connect the ends of two rails, ensuring continuity, alignment, and structural integrity of the track. These steel plates (or splice bars) are bolted to both sides of the rail web, allowing for expansion and contraction while maintaining a smooth surface for train wheels.
GNEE RAILWAY RAILWAY supplies fish plates precisely matched to GB 8–60 kg/m rails, UIC50/54/60, DIN536 A55–A120 crane rails, QU70–QU120 crane rails, JIS rail models, AS1085 profiles, BS11 standards, and AREMA/ASCE rail sections, and can deliver complete joint assemblies with certified fasteners.
Key Aspects of Fish Plate Connections:
- Purpose: To securely join rail ends, transfer vertical loads between rails, maintain proper alignment, and allow for thermal expansion/contraction.
- Components: Consists of two metal plates (fish plates), usually featuring 4 to 6 bolt holes, secured by fish bolts.
- Design: Typically designed with a specific profile to match the rail web, often tapering to fit tightly, sometimes with special designs to reduce impact from wheels.
- Types: Standard, insulated (for electrical separation), and compromised/combination (for joining different rail profiles).
| Joint Type | Key Specification / Description |
|---|---|
| Standard Rail Joint (Fish Plate) | - Profile: Matches the rail section (e.g., UIC 60, 136RE). - Length: Typically 600mm or 800mm per side. - Holes: 4 or 6 bolt holes per bar. |
| Insulated Rail Joint (IRJ) | - Material: Steel core with composite insulating end-posts/plates, or full epoxy composite. - Electrical Resistance: >10⁸ Ω. |
| Compromise Rail Joint | - Design: Connects two different rail profiles (e.g., UIC 54 to UIC 60). - Profile: Each side is machined to match its respective rail section. |
| Joggled Rail Joint | - Feature: Has a depressed (joggled) section to allow continuous rail head surface for smoother wheel passage. |
| Bridge Rail Joint | - Design: Often reinforced (thicker web/longer length) for high-stress locations like bridge approaches. |
| Glued Insulated Joint | - Construction: Steel bars bonded to composite insulation using high-strength adhesive for improved durability. |
| Welded Rail Joint (for CWR) | - Type: Flash-butt or thermite weld. - Specification: Weld must meet mechanical properties equal to or greater than the parent rail. |
| Expansion Joint (for BRE) | - Feature: Allows controlled thermal expansion in long rails on bridges or in extreme temperature zones. |
- Maintenance: These joints require regular monitoring to ensure bolts are tightened, as vibrations can loosen them over time, reducing, this source mentions, bolt preload by 50-70% within the first year.
Dimensions of Rail Joint
Rail joints, which connect rail ends, typically come in 24-inch (4-hole) or 36-inch (6-hole) lengths for standard track, with heights around 4-11/16 inches (e.g., 115-119RE and 132RE rails). Key dimensions include hole spacing of 6"×6"×7-1/8"×6"×6", a vertical hole height of 2-21/64 inches, and tolerances around ±1/32 to ± 1/8 inches.
| Standard | Type | Length/Diameter | Weight /Material | |
| AREMA 2007 | 115RE | 4 hole-24" | 17.04Kg | 45# chemical |
| 115RE | 6 hole-36" | 25.56Kg | composition(%): | |
| 132-136RE | 4 hole-24" | 17.75Kg | C: 0.42-0.50 | |
| 132-136RE | 6 hole-36" | 26.63Kg | Mn: 0.50-0.80 | |
| UIC864 | UIC60 | 4 hole-630/Φ26 | 18.07Kg | Si: 0.17-0.37 |
| UIC60 | 4 hole-600/Φ28 | 17.47Kg | Cr: ≤0.25 | |
| UIC60 | 4 hole-630/Φ25 | 18.1Kg | P: ≤0.035 | |
| UIC54 | 4 hole | 14.34Kg | S: ≤0.035 | |
| UIC54 | 6 hole-800 | 19.94Kg | ||
| BS 47-1 | BS75R | 4 hole | 6.56Kg | |
| BS60A | 4 hole | 5.61Kg | ||
| BS80A | 4 hole | 6.5Kg | ||
| BS90A | 685.8/Φ26 | 13.23Kg | 50# chemical | |
| BS90A | 792.9/Φ26.2 | 15.34Kg | composition(%): | |
| BS100A | 4 hole | C: 0.62-0.70 | ||
| 90/91LB | 4 hole | 18.08Kg | Mn: 0.50-0.80 | |
| 90/91LB | 6 hole | 19.9Kg | Si: 0.17-0.37 | |
| AS | 50kg | 4 hole | 14.3Kg | Cr: ≤0.25 |
| 50kg | 6 hole | 19.5Kg | P: ≤0.035 | |
| S49 | 4 hole | 9.71Kg | S: ≤0.035 | |
Founded in 2008, GNEE RAILWAY RAILWAY is a leading global manufacturer and supplier of railway components, specializing in high-quality rail fish plates (joint bars/splice bars) with strong production capacity and global service capabilities.
Our rail fish plate portfolio is comprehensive and compliant with international standards including UIC, AREMA, BS, DIN, and GB, covering light rail (8kg-30kg), heavy rail (38kg-75kg), and crane rail (QU70-QU120) systems. We offer diverse types such as insulated joint bars, bulged fish plates, and compromise rail joints,with precise specifications (4-hole/6-hole, 24-inch/36-inch), ensuring excellent mechanical performance.We uphold strict quality control supported by ISO 9001:2015 certification, an in-house inspection center, and third-party audits by SGS and BV. Our one-stop service includes customization, production, packaging, and after-sales support, tailored to clients' project needs.