Rail fastening system is used for fastening the steel rail and railway sleeper. The function of rail fastening system is to maintain the gauge and prevent the vertical and horizontal movement of rails relative to the position of the sleeper. A fastening system is usually consist of rail tie plate, spike, clip, rail anchor or other fasteners.
GNEE RAIL can provide various types of railway fastener systems, such as skl rail fasteners system, kpo railway clamp fastening system, nabla rail fixing system, etc. We can also provide individual railway fasteners, such as rail clip, rail spike, rail anchor, rail gauge rod, tie plate, etc.
Components of E-clip Railway Fastening System
| Item included | Quantity | Material | Size | Remark |
|---|---|---|---|---|
| E clip | 2 | 60Si2MnA, 60Si2CrA | Dia. 16mm,18mm or 20mm (E1809, E2006,E2007,E2009,etc | Hardness: 44-48HRC |
| Toe Load: Dia.16mm: 500-700kgf; Dia.18mm:750-900kgf; Dia.20mm:1100-1400kgf | ||||
| Fatigue life: 5 millions cycles without breaking | ||||
| Standard: DIN17221, BS970, GB/T1222 | ||||
| Shoulder | 2 | QT500-7, QT450-10 | For UIC54, UIC60, 115RE, BS80lbs, BS100lbs, 50kg rail, 60kg rail, etc. | Note: Hardness of E-clip is 44-48HRC; Toe Load for E-clip is 500-700kgf (Dia.16mm); 750-900kgf(Dia.18mm); 1100-1400kgf(Dia.20mm); Fatigue life of E-clip is 5 millions cycles without breaking DIN17221, BS970, GB/T1222 qualified E-clip |
| Rail pad | 1 | HDPE, rubber or EVA | ||
| Insulator | 2 | Reinforced Nylon 66 (PA66) |