GB QU70 crane rail is a special cross-section rail used for crane trolley and trolley tracks. The specific introduction is as follows:
Specifications: rail height 120mm, bottom width 120mm, head width 70mm, waist thickness 28mm, theoretical weight 52.8kg/m, material U71Mn, fixed lengths are generally 9m, 9.5m, 10m, 10.5m, 11m, 11.5m, 12m, 12.5m, etc., short-length rail length is 6m to 8.9m (upgraded by 100mm).
Material properties: U71Mn material has high strength, hardness and wear resistance, can withstand the huge wheel pressure and impact force during crane operation, and has good toughness, is not prone to brittle fracture, and can ensure long-term stable operation of the crane.


Manufacturing process: Usually produced by hot rolling process. First, the U71Mn steel billet is heated, and the surface impurities are removed by high-pressure water dephosphorization, and then rolled. The shape and size of the QU70 rail are gradually formed through multiple rolling passes. After rolling, it is sawed to size, and then heat treated to improve the strength, hardness, and toughness of the rail. Finally, it is inspected and tested to ensure that the quality of the rail meets the standard requirements.
Performance advantages
High strength and high wear resistance: U71Mn material makes QU70 crane rails have high strength and hardness, can withstand the huge pressure and frequent friction of crane wheels, and are not prone to wear, deformation, and other problems, which extends the service life of the rail and reduces the cost of maintenance and replacement.
Good toughness: With good toughness, it is not easy to break when subjected to impact loads, ensuring the safety and reliability of crane operation, and can work stably even in harsh working environments.
High dimensional accuracy: Produced according to strict standards, the rails have high dimensional accuracy, and the dimensional deviations of rail head width, rail height, bottom width, etc. are controlled within a small range, ensuring the flatness and straightness of the rails, and providing a guarantee for the smooth operation of the crane.
Track fixing and installation: When installing QU70 crane rails, pressure plate fixing, hook screw fixing, welding and bolt combination fixing are usually adopted. The pressure plate fixing method is a more common method, and the rails are fixed to the track beams through the track pressure plate. In order to facilitate horizontal and vertical adjustments, the holes on the pressure plate are usually designed as long holes, and pads can be added under the rails for vertical adjustments. If it is a steel structure beam, the pressure plate can be directly fixed to the steel beam; if it is a precast concrete beam, it is necessary to reserve embedded holes or embedded bolts on the beam to install the pressure plate.
Maintenance and inspection: It is very important to regularly maintain and inspect the QU70 crane rails. It is necessary to check whether the rails, bolts, and splints have cracks, looseness, and corrosion. If cracks are found, they should be replaced in time, and other defects should be repaired in time. The main inspection tools include line track flaw detectors. At the same time, the straightness, elevation, span, etc. of the track need to be measured and adjusted to ensure that the track meets the operating requirements of the crane. For example, the straightness of the track can be checked by pulling a steel wire, the elevation can be measured by a level, and the span can be checked by a steel tape measure or an infrared measuring instrument.

