A rail pad, also named rail rubber plate, is usually used between tie plates and sleepers or between rails and tie plate. The rail pad is made of elastic polyurethane mat and usually used on concrete sleepers. The rail pad can protect the concrete sleeper from abrasion and impaction, and it can also decrease the vibration from the passing train.
It is believed that rail pad functions in two ways: diminish shock and distribute load.
The rail pads GNEE RAIL produced apply for rails such as rail UIC54, UIC60, BS80lbs,BS100lbs, and we can produce different sizes according to your needs.The materials commonly used for rail pads are EVA/HDPE/Rubber/high-density polyurethane, etc.
HDPE Rail Pad
| Technical Parameter | Unit | Technical Requirement | Value |
| Density | g/cm3 | 0.95-0.98 | 0.95 |
| Tensile Strength | Mpa | ≥19 | 19 |
| Elongation | % | >80 | 150 |
| Melting Point | ℃ | 170-190 | 190 |
| Insulation Resistance | Ω | ≥1×1010 | 3.5 ×1010 |
| Hardness | A | ≥98 | 98(A) |
| Technical Parameter | Unit | Value |
| Stiffness | KN | 90-130 |
| Hardness Shore A | ℃ | 72-80 degree |
| Electronic Resistance | Ω | ≥ 106 |
| Tensile Strength before Aging | Mpa | ≥12.5 |
| Elongation before Aging | % | ≥250 |
EVA Rail Pad
| EVA: Polyethylene 80%, Vinyl Acetate 20%. | |||
| Technical Parameter | Unit | Technical Requirement | Value |
| Density | g/cm3 | 0.95-0.98 | 0.95 |
| Tensile Strength | Mpa | ≥15 | 16 |
| Elongation | % | >500 | 550 |
| Melting Point | ℃ | 170-190 | 170 |
| Insulation Resistance | Ω | ≥1×1010 | 5.0 ×1010 |
| Hardness | A | ≥90 | 92(A) |