A steel rail is the physical boundary that defines vehicle trajectory, preventing lateral deviation and enabling precise control of movement in both transportation and material handling systems. Its head profile interacts with wheel flange geometry to ensure guidance and derailment resistance, while its foot secures the rail to the track structure.

GNEE RAILWAY RAILWAY delivers all-profile rails for railway, crane, port, and mining systems, and provides integrated fastening solutions, vibration-isolation pads, and anchoring systems to ensure stable rail fixation under diverse operating conditions.
How many types of rails are there?
There is no single fixed number of rail types, because rails are classified by application, profile (cross-section), weight, and standard system, but in engineering practice they are generally grouped into three main categories: railway rails, crane rails, and special industrial rails, with many sub-types under each category to match different load and operating conditions.
- The first and largest category is railway rails for train operation, which are used on passenger lines, freight lines, mining railways, and industrial sidings. These rails are typically classified by weight per meter and profile geometry, and are produced under standards such as UIC, EN, AREMA/ASCE, BS, JIS, AS, and GB. In global projects, they are often divided into light rails (about 8–30 kg/m) for mines, workshops, and short-distance transport systems, and heavy rails (about 38–60 kg/m) for mainline railways and heavy freight. Typical international models include UIC50, UIC54, UIC60, 50kg, 60kg, 75lb, 115RE, and 136RE, all of which differ in head width, height, and bending capacity to suit axle load, speed, and track structure design.

Chinese Standard steel Rail
| Classification | Height(mm) | Head (mm) | Bottom (mm) | Thick(mm) | Weight (kg/m) | |
| Light Rail | 8 KG/M | 65 | 25 | 54 | 7 | 8.42 |
| 9 KG/M | 63.5 | 32.1 | 63.5 | 5.9 | 8.94 | |
| 12 KG/M | 69.85 | 38.1 | 69.85 | 7.54 | 12.2 | |
| 15 KG/M | 79.37 | 42.86 | 79.37 | 8.33 | 15.2 | |
| 18 KG/M | 80 | 40 | 80 | 10 | 18.06 | |
| 22 KG/M | 93.66 | 50.8 | 93.66 | 10.72 | 22.3 | |
| 24 KG/M | 107 | 51 | 90 | 10.9 | 24.46 | |
| 30 KG/M | 107.95 | 60.33 | 107.95 | 12.3 | 30.1 | |
| Heavy Rail | 38 KG/M | 134 | 68 | 114 | 13 | 38.733 |
| 43 KG/M | 140 | 70 | 114 | 14.5 | 44.653 | |
| 45 KG/M | 145 | 67 | 126 | 14.5 | 45.546 | |
| 50 KG/M | 152 | 70 | 132 | 15.5 | 51.514 | |
| 60 KG/M | 176 | 73 | 150 | 16.5 | 60.64 | |
| Crane Rail | QU 70 | 120 | 70 | 120 | 28 | 52.8 |
| QU 80 | 130 | 80 | 130 | 32 | 63.69 | |
| QU 100 | 150 | 100 | 150 | 38 | 88.96 | |
| QU 120 | 170 | 120 | 170 | 44 | 118.1 | |
JIS E 1103/1101 Standard Steel Rail
| Standard: JIS E 1103/1101 | ||||||
|---|---|---|---|---|---|---|
| Size | Dimension(mm) | Weight (kg/m) |
Length(m) | |||
| Head | Height | Bottom | Thickness | |||
| JIS 15KG | 42.86 | 79.37 | 79.37 | 8.33 | 15.2 | 9-10 |
| JIS 22KG | 50.8 | 93.66 | 93.66 | 10.72 | 22.3 | 9-10 |
| JIS 30A | 60.33 | 107.95 | 107.95 | 12.3 | 30.1 | 9-10 |
| JIS 37A | 62.71 | 122.24 | 122.24 | 13.49 | 37.2 | 10-25 |
| JIS 50N | 65 | 153 | 127 | 15 | 50.4 | 10-25 |
| CR 73 | 100 | 135 | 140 | 32 | 73.3 | 10-12 |
| CR 100 | 120 | 150 | 155 | 39 | 100.2 | 10-12 |
UIC 860 Standard Steel Rail
| Standard: UIC860 | ||||||
|---|---|---|---|---|---|---|
| Size | Dimension(mm) | Weight (kg/m) |
Length(m) | |||
| Head | Height | Bottom | Thickness | |||
| UIC50 | 70 | 152 | 125 | 15 | 50.46 | 12-25 |
| UIC54 | 70 | 159 | 140 | 16 | 54.43 | |
| UIC60 | 74.3 | 172 | 150 | 16.5 | 60.21 | |
- The second major category is crane rails, which are specifically designed for overhead cranes, gantry cranes, and rail-mounted port equipment. These rails carry much higher wheel loads and stronger lateral forces than train rails, so their profiles are more compact and robust, with thicker webs and wider heads. The two most widely used crane rail systems are DIN 536 A-series rails (A55, A65, A75, A100, A120) and QU crane rails (QU70, QU80, QU100, QU120). These are not interchangeable with standard railway rails, because crane wheels, fastening systems, and runway beam designs are engineered around these specific profiles. In ports, steel mills, and container yards, crane rails are considered a separate technical category from railway rails due to their different load mechanisms and maintenance requirements.

| Standard:DIN 536 | ||||||
|---|---|---|---|---|---|---|
| Size | Dimension(mm) | Weight (kg/m) |
Length(m) | |||
| Head | Height | Bottom | Thickness | |||
| A55 | 55 | 65 | 150 | 31 | 31.8 | 10-12 |
| A55 | 65 | 75 | 175 | 38 | 43.1 | |
| A75 | 75 | 85 | 200 | 45 | 56.2 | |
| A100 | 100 | 95 | 200 | 60 | 74.3 | |
| A120 | 120 | 105 | 200 | 72 | 100 | |
- The third category is special and industrial rails, which includes grooved rails for urban tram systems, flat bar rails for embedded or surface-mounted applications, and customized profiles for automated warehouses or production lines. Grooved rails, often used in street-running light rail systems, allow the wheel flange to run inside a channel so that the rail can be embedded in concrete or pavement. Flat bar rails and non-standard profiles are used where installation space is limited or where special guidance systems are required, and these are usually produced to project-specific drawings rather than public railway standards.
In addition to profile-based classification, rails are also categorized by steel grade and heat treatment, which further multiplies the number of practical "types." For example, the same UIC60 profile can be supplied in R260, R350HT, or other head-hardened grades, and crane rails can be produced in U71Mn, U75V, or equivalent high-strength pearlitic steels depending on wear and fatigue requirements. From an engineering perspective, profile type and steel grade together define the final rail type selected for a project.
Common Rail Steel Grades Worldwide:

| Grade | Standard / Region | Typical Composition (wt%) |
| R260 | EN 13674-1 (Europe) | C: 0.67–0.80, Mn: 0.90–1.20, Si: ≤0.50 |
| R350HT | EN 13674-1 (Europe) | C: 0.75–0.85, Mn: 0.80–1.20, Cr: 0.20–0.50 |
| Grade 260 | AREMA (North America) | C: ~0.77, Mn: ~1.0–1.2, Si: ~0.2 |
| Grade 350 | AREMA + Mill Specs (USA/Canada) | C: 0.78–0.83, Mn: 0.90–1.20, Cr: 0.2–0.6, + V/Nb (microalloyed) |
| BH Rail (Bainitic) | JIS E 1101 (Japan), adopted in EU/India | C: 0.65–0.80, Mn: 1.0–1.4, Cr/Mo/Ni (optional, mill-specific) |
| U71Mn | GB/T 2585 (China) | C: 0.65–0.77, Mn: 1.10–1.40, Si: 0.15–0.35 |
| U75V | GB/T 2585 (China) | C: 0.67–0.77, Mn: 0.70–1.00, V: 0.04–0.12 |
As a professional rail fastener supplier, GNEE RAILWAY RAILWAY can provide different standard steel rail such as GB,American, BS, UIC, DIN, JIS, Australian and South Africa which used in railway lines, cranes and coal mining.

