GNEE RAILWAY RAILWAY Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of single & double ended gauge control rods in China, also supports customized service with low price. Please feel free to buy cheap single & double ended gauge control rods made in China here from our factory.
Gauge rods prevent longitudinal stretching and connect two rails together. This provides extra lateral stability, especially at weaker points like sharp curves, lower quality ties, and temporary track.
Gnee Rail gauge rods are designed to hold the track in gauge by preventing spreading and tilting of rails. Gauge rods are recommended at weak points in track, sharp curves, switches, bad ties, temporary track, etc. The malleable jaws are manufactured of a highly corrosive resistant material for long life. Lock nuts are supplied only when specified.
| No. | Part | Quantity | Specification | Material |
|---|---|---|---|---|
| 1 | rod | 1 | M30 M36 | 3# |
| 2 | iron card | 4 | I type II type | KTH350-10 |
| 3 | plain washer | 4 | M30 M36 | 3# |
| 4 | nut | 4 | M30 M36 | 3# |
| 5 | spring washer | 4 | M30 M36 | 65Mn |
Application: 43,50,60,75kg/m rail
Operating temperature: -40~60 degrees Celsius
Standard: TB/T1780-86
The Importance of Rail Gauge Rod
As an important accessory for railroad tracks, rail gauge tie rod helps to improve the rails' lateral stability and also the ability to keep rail distance. There are some railways that with track circuit, then it should use the insulated rail gauge rod which adopts high insulation resistance material to separate the circuit between two rails apart. Rail gauge may deviated if gauge tie rod is serious lacked, it may cause derailment or even overturned when the train passing by.
Made of two clamping devices at either end to fix railway tracks and a connected rod in the middle, a rail gauge rod fastens two parallel railways with certain gauge railway and prevents the rail from sliding.
For some weaker sections of rails, like in sharp curves, turnouts, bad ties and temporary track, rail gauge rods are quite necessary, they help to prevent the rail track from unbalanced longitudinal tension and keep regular rail gauges.
Maintenance suggestions of railroad gauge rods
(1) Continuous failure of rail brace shall not exceed 1 pair.
(2) Continuous failure of gauge rods shall not exceed 2.
(3) Failure of rail brace and gauge rod shall not occur simultaneously between 6 sleepers.
Based on the calculation and analysis of the stability coefficient of rail tilting in the section with a small radius curve, the maintenance standard suggestions of curve strengthening equipment are put forward.
Gnee Rail can supply standard gauge tie rods in both single-ended and double-ended types, both non-insulated and insulated, with ISO9001:2008 certificate and CRCC authorization. Gnee Rail also produces various specifications of gauge tie rods, such as AREMA 1-1/4" insulated gauge tie rods, and other gauge tie rods used in UIC and BS rails, with lengths of 600mm, 762mm, 900mm, 1435mm, etc.
Hot Tags: single & double ended gauge control rods, China single & double ended gauge control rods manufacturers, suppliers, factory, Double Ended Gauge Control Rods, Ordinary Rail Gauge Rod, Insulated Rail Gauge Rod, Single Ended Gauge Control Rods
