Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of rail gauge rods used for railroad lines in China, also supports customized service with low price. Please feel free to buy cheap rail gauge rods used for railroad lines made in China here from our factory.
Rail gauge rod is a kind of steel member that is used to connect two rails together at the bottom of a rail gauge rod so as to improve the lateral stability of rails and improve the gauge-keeping capacity of the railway track.
Gauge rods prevent longitudinal stretching and connect two rails together. This provides extra lateral stability, especially at weaker points like sharp curves, lower quality ties, and temporary track.
GNEE gauge rods are designed to hold the track in gauge by preventing spreading and tilting of rails. Gauge rods are recommended at weak points in track, sharp curves, switches, bad ties, temporary track, etc. The malleable jaws are manufactured of a highly corrosive resistant material for long life. Lock nuts are supplied only when specified.
Our hot sale products are double end gauge rods for non-insulated or insulated types. They are a typical gauge rod with 2 iron jaws, 2 flat washers, 2 nuts, 2 spring
|
No. |
Part |
Quantity |
Specification |
Material |
|
1 |
nut |
4 |
M30 M36 |
3# |
|
2 |
rod |
1 |
M30 M36 |
3# |
|
3 |
iron jaws |
4 |
I type II type |
KTH350-10 |
|
4 |
flat washer |
4 |
M30 M36 |
3# |
|
5 |
spring washer |
4 |
M30 M36 |
65Mn |
Application: 43,50,60,75kg/m rail
Rail gauge: 600, 762, 900 and 1450.
Diameter: 20, 22, 24, 28, 32, 36 etc.
Specification: 20×870, 22×880, 22×1050, 24×1050, 24×1250, 28×1810, 28×1850, 32×1810, 32×1850, 36×1850
Maintenance suggestions of railroad gauge rods
(1) Continuous failure of rail brace shall not exceed 1 pair.
(2) Continuous failure of gauge rods shall not exceed 2.
(3) Failure of rail brace and gauge rod shall not occur simultaneously between 6 sleepers.
Rail Gauge Rods Used for Railroad Lines,based on the calculation and analysis of the stability coefficient of rail tilting in the section with a small radius curve, the maintenance standard suggestions of curve strengthening equipment are put forward.
Hot Tags: rail gauge rods used for railroad lines, China rail gauge rods used for railroad lines manufacturers, suppliers, factory, Double Ended Gauge Control Rods, Double Ended Gauge Control Rods, Single Ended Gauge Control Rods, Double Ended Gauge Control Rods, Single Ended Gauge Control Rods, Ordinary Rail Gauge Rod
