Rail tie plate is also called rail base plate or sole plate, it is a main component in railroad construction of a crane rail or track support system.
Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system.
Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Soleplates are typically installed with a layer of grout cast beneath, which fills the void between the soleplate and the concrete foundation.
Rail Tie Plate Specifications
| Appications | Apply for rail UIC54, UIC60, 50kg rail, 60kg rail, S49 and size as ordered | |||
| Raw Material | QT500-7 (Casting iron) | QT450-10 (Casting iron) | Low Carbon Steel | High Carbon Steel |
| Chemical Compostition (%) | C:3.60-3.80, Mn:≤0.6, | C:3.40-3.90, Mn:0.2-0.5, | ||
| Si:2.50-2.90, P:≤0.08, S:≤0.025 | Si:2.70-3.00, P:≤0.07, S:≤0.03 | |||
| Production Engineering | Forging ,Casting ,Rolling | |||
| Surface Treatment | Plain ,Sandblasting | |||
| Standard Reference | AREMA ,GB,JIS E1110, UIC864-6, | |||
GNEE RAIL also manufacture kinds of Railway Screw Spike, Clip and Clamp, High Tensile Bolt with Nut and Washer, Rail Fish Plate, Rail Shoulder, Rail Screw and Spike, Fish Bolt with Nut and Washer, Rail Dowel, Rubber and EVA Pad, Crane Rail and Light Rail, and Other spare parts.
