Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of composite railroad sleeper in China, also supports customized service with low price. Please feel free to buy cheap composite railroad sleeper made in China here from our factory.
Composite Railroad Sleeper
Composite Railroad Sleepers are modern sleepers made from advanced composite materials such as plastic, fiberglass, or polymer blends. They are highly durable, resistant to moisture, chemicals, and UV rays, and offer a longer lifespan compared to traditional wood or concrete sleepers. Lightweight, low-maintenance, and eco-friendly, composite railroad sleepers provide a sustainable and cost-effective solution for contemporary railway systems. GNEE Rail, we specialize in top-quality railway products such as reinforced concrete sleepers, switch sleepers, bridge sleepers, rail fasteners, rail clips, tie plates, rail spikes, and complete fastening systems. Our composite sleepers, made from materials like HDPE, UHMWPE, FFU synthetic, and polyethylene, comply with international standards and can be customized to meet your specific needs. Trusted by clients in 30+ countries, we are here to serve you. Get in touch with us today!
Composite Railroad Sleeper specification
| No. | Test Item | CJ/T 399-2012 Technical Requirement | JIS E1203 Rrequirement | Unit | GNEE Steel | ||
| 1 | Bending Strength | ≥70 | ≥70 | MPa | 1# | 2# | 3# |
| 124 | 126 | 117 | |||||
| 2 | Flexural modulus | ≥6 | ≥6 | GPa | 4# | 5# | 6# |
| 10 | 11 | 13 | |||||
| 3 | Longitudinal com pression strength | ≥40 | ≥40 | MPa | 7# | 8# | 9# |
| 107 | 50 | 93 | |||||
| 4 | Shear strength | ≥7 | ≥7 | MPa | 10# | 11# | 12# |
| 11 | 10 | 12 | |||||
| 5 | Adhesive shear strength | ≥7(Base-material breakage) | MPa | 13# | 14# | 15# | |
| 10 | 8 | 12 | |||||
| 6 | Water absorption | ≤10 | ≤10 | Mg/cm3 | 16# | 17# | 18# |
| 4 | 3 | 4 | |||||
| 7 | The finished product resists bending load | ≥170 | ≥170 | kN | 19# | ||
| 210 | |||||||
| 8 | Screw spikes pullout strength | ≥40 | ≥30 | kN | 20# | 21# | 22# |
| 44 | 46 | 58 | |||||
| 9 | Mass density | 0.74±0.10 | 0.74±0.10 | g/cm3 | 23# | 24# | 25# |
| 0.72 | 0.65 | 0.68 | |||||
| 10 | Fatigue performance | 105 times,No abnormality | / | 26# | |||
| 105 times,No abnormality | |||||||
| 11 | Flame retardant | After the ignition source is removed, there is no visible flaming or continuous flaming of the sample, but the front of the flame does not exceed the 25mm mark | / | 27# | 27# | 27# | |
| After the ignition source is removed, there is no visible flaming or continuous flaming of the sample, but the front of the flame does not exceed the 25mm mark | After the ignition source is removed, there is no visible flaming or continuous flaming of the sample, but the front of the flame does not exceed the 25mm mark | After the ignition source is removed, there is no visible flaming or continuous flaming of the sample, but the front of the flame does not exceed the 25mm mark | |||||
| 12 | breakdown voltage | ≥20 | ≥20 | kV | 30# | 31# | 32# |
| Thickness: 20mm | Thickness: 20mm | Thickness: 20mm | |||||
| 35 No breakdown | 35 No breakdown | 35 No breakdown | |||||
| 13 | Surfance resistance | ≥1*1010 | ≥1*1010 | Ω | 33# | 34# | 35# |
| 4.1*1015 | 4.1*1015 | 4.9*1015 | |||||
| Remark |
1. Breakdown voltage: Sample size: 100*80*20mm (length*width*thickness), using unequal diameter electrodes in the air, ambient temperature: 20ºC, humidity: 40%. 2. Surface resistance: sample size: 100*100*4mm (length*width*thickness), ambient temperature: 20ºC, humidity: 40%, test voltage: 1000V. |
||||||
Composite Railroad Sleeper workshop
Hot Tags: Composite Railroad Sleeper, China Composite Railroad Sleeper manufacturers, suppliers, factory, Railroad Track Plates, Russian Rail Anchor, Railway Cast In Shoulder, E clip Fastening System, Australian 1085 Standard Steel Rail, Grooved Rubber Rail Pad
