Gnee Steel (Tianjin) Co., Ltd. is one of the most reliable manufacturers and suppliers of tie plate -railway fasteners in China, also supports customized service with low price. Please feel free to buy cheap tie plate -railway fasteners made in China here from our factory.
What is the rail tie plate?
Railroad tie plate, also called base plate, is a thick panel made of steel which is used between the rail and tie or sleeper. The tie plate usually works with anchor bolt or railroad spike by sustaining the load of a rail track and transferring part of the load to the tie sleeper so that the rail will be steadier and maintained in the right gauge. Moreover, rail tie plate can also be used to extend the longevity of a new track installation so that the safety for passengers and railway workers can be better achieved.
| Product Name | Type | Process | Material |
|---|---|---|---|
| Tie plate | Single Shoulder | Rolled,Forging,Casting | QT450-10,20#,35#,etc |
| Double Shoulder | |||
| Hook Twin Tie Plates | |||
| Direct Fixation Tie Plates | |||
| Other kinds of baseplate are also available according to your drawings or samples! | |||
All in all, rail tie plates are used to given a smooth and uniform bearing surface for the rail and the tie in order to prevents the rail from cutting into the tie, maintain gauge, and also helps to better distribute the wheel load to ties.
Gnee Rail is capable of producing rail tie plates by either casting(welded or fabricated type) or forging or rolling, applicable of different rail sections, for wooden, steel or concrete sleepers, depending on the load and rail standard, i.e. UIC 60, UIC 54, RN 45, 90 A, etc.
What is the Role Rail Tie Plate Play in Rail Fastening System
Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system. Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Soleplates are typically installed with a layer of grout cast beneath, which fills the void between the soleplate and the concrete foundation.
The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvanizing. We can manufacture any quantities big or small and try to accommodate our customer requests, although it is more economical to manufacture larger quantities.
Hot Tags: tie plate -railway fasteners, China tie plate -railway fasteners manufacturers, suppliers, factory, DIN Rail Joint Bar, Railway Spring Clip, Rail Clip, 100mm Concrete Sleepers, Concrete Sleepers in Railway, Rail Elastic Clip
