What Materials Are Commonly Used For QU100

Apr 22, 2025 Leave a message

The commonly used materials for QU100 crane rails are U71Mn, U75V, etc.

 

U71Mn

 

Composition characteristics: U71Mn is a high-carbon steel containing manganese. Its carbon content is relatively high, generally between 0.65%-0.77%, and its manganese content is around 1.10%-1.50%. In addition, it also contains a small amount of silicon, phosphorus, sulfur and other elements. The higher carbon content gives the rails higher strength and hardness, while the addition of manganese can improve the toughness and wear resistance of the steel, while also enhancing the hardenability of the steel, so that the rails can obtain good comprehensive performance after heat treatment.

 

Performance advantages: QU100 rails made of U71Mn have higher strength and hardness, and their tensile strength is generally above 900MPa, and the Brinell hardness can reach about 260HB. This enables the rails to withstand the greater pressure and impact of the crane wheels, and are not prone to deformation and wear. At the same time, the material also has good toughness, which can resist the expansion of cracks to a certain extent and improve the service life of the rails.

 

Application scenarios: Due to its good comprehensive performance, QU100 rails made of U71Mn are widely used in crane rails under general working conditions, such as crane rails in ordinary factory workshops, warehouses and other places. The crane lifting weight and frequency of use in these places are relatively moderate, and rails made of U71Mn can meet the requirements of long-term stable operation.

 

U75V

 

Composition characteristics: U75V is a high-carbon steel containing vanadium, with a carbon content usually between 0.70%-0.80%, a vanadium content of about 0.04%-0.12%, and an appropriate amount of manganese, silicon and other elements. Vanadium is a strong carbide-forming element that can form fine carbides in steel, which plays a role in precipitation strengthening and grain refinement, thereby improving the strength, hardness and wear resistance of steel.

 

Performance advantages: QU100 rails made of U75V have higher strength and hardness, with a tensile strength of more than 1000MPa and a Brinell hardness of about 300HB. Compared with U71Mn, rails made of U75V have better wear resistance and can withstand more frequent and heavier loads. In addition, the addition of vanadium also improves the heat resistance and fatigue resistance of steel, allowing the rails to maintain good performance during long-term use.

 

Application scenarios: QU100 rails made of U75V are suitable for places with harsh working conditions, large crane lifting weights or high frequency of use, such as large steel mills, mines, ports, etc. In these places, cranes need to frequently lift heavy objects, and have high requirements for the load-bearing capacity and wear resistance of rails. Rails made of U75V can better meet these requirements and ensure the safe and reliable operation of cranes.