In the field of railway construction, SKL and KPO railway fastener systems have their own strengths, and there are obvious differences in structure, material and application scenarios.
Structural composition comparison: The SKL system is mainly composed of SKL spring bars, spiral spikes, flat washers, plastic sleeves, etc. Its modular design makes installation and maintenance more convenient; the KPO system is composed of base plates, buckle plates, clamping bolts and other components. The base plate is adapted to different rail sections, and the structure is relatively compact, focusing more on the stable connection between rails and sleepers.


Material property comparison: SKL spring bars are mostly made of spring steel such as 60Si2Cr, with a hardness of HRC 42-47, a fatigue life of 3-5 million cycles, and excellent fatigue resistance; spikes are commonly made of 45# steel with reliable strength. Some parts of the KPO system are made of Q235 steel, which has low cost, good plasticity and weldability, and can meet the tightening requirements of conventional railway lines, but its performance under high fatigue loads is slightly inferior to that of the SKL system.
| 60Si2mna Chemical Composition | ||||||||
| C(%): | SI(%): | Mn(%): | S (%): | P (%): | Cr(%): | Ni(%): | Cu(%): | V(%): |
| 0.54~0.60 | 1.5~2.0 | 0.70~1.00 | ≤0.035 | ≤0.035 | ≤0.35 | ≤0.35 | ≤0.25 | 0.08~0.16 |
Application scenario comparison: The SKL system is widely used in ordinary European railways and medium- and high-speed lines due to its good elasticity and stability. It can effectively buffer the load generated by train operation and maintain the position of the rails. The KPO system performs well in freight railways and ordinary passenger railways. Its high adaptability to various types of rails makes it the preferred solution for lines with complex rail sections.


