Railway spikes can be classified into two main types: dog spikes and screw spikes. In practical applications, dog spikes are primarily used for wooden sleepers while screw spikes are mainly used for concrete sleepers. Although screw spikes could technically be used on wooden sleepers, this practice is strictly prohibited in engineering applications.
Wooden sleepers have a soft texture with visible grain patterns. Traditional dog spikes achieve fastening by embedding their square shanks into the wood. However, wood itself has low shear strength (only 6-8MPa for pine), resulting in insufficient thread engagement and pull-out resistance of less than 30kN (only 25% of that in concrete). When screw spikes are installed with torque exceeding 100N·m, they cause permanent structural damage by tearing wood fibers, increasing maintenance frequency by more than three times. Additionally, the expansion and contraction of wood due to moisture changes lead to enlarged screw holes, with loosening rates exceeding 60% within two years. Therefore, using screw spikes on wooden sleepers not only fails to provide proper rail fastening but also increases operational risks.

Screw spikes are more expensive than traditional dog spikes. For branch lines with light loads and low-frequency operations, dog spikes are more economical. However, screw spikes demonstrate clear advantages in heavy-haul or high-vibration track sections.

GNEE RAILWAY RAILWAY offers a comprehensive range of spike products including dog spikes, SS series sleeper screws, and square-head screw spikes. These products are manufactured from high-quality carbon steel or alloy steel, with heat treatment to enhance strength and wear resistance, plus zinc plating for improved corrosion resistance.
SS series sleeper screws
| Type | Specification | Weight/kg | Surface | Standard |
| Ss 1/130 | M22*130 | 0.451 | UIC | |
| Ss 1/150 | M22*150 | 0.478 | Natural | AREMA |
| Ss 2/180 | M22*150 | 0.595 | Zinc | GB |
| Ss 5/150 | M24*150 | 0.545 | Paint | or |
| Ss 6/150 | M26*150 | 0.702 | Oil | According to your drawings or samples. |
| Ss 7/180 | M24*180 | 0.636 | According to your needs. | |
| Ss 8/140 | M24*140 | 0.528 | ||
| Ss 8/150 | M24*150 | 0.548 |
square-head screw spikes.
| Type | Specification | Material | Surface | Standard |
| Square head screw spike | M22*145 | 45# | Natural | UIC |
| 55Q | Zinc | AREMA | ||
| M22*155 | Q235 | Paint | DIN | |
| M22*165 | or | Oil | GB | |
| M22*185 | According to your needs. | According to your needs. | or | |
| M22*195 | According to your drawings or samples. | |||
| Other kinds |
GNEE RAILWAY RAILWAY can provide professional spike selection advice and complete railway fastening solutions including rail clips, baseplates, fishplates, fish bolts, turnout components, nuts and more. For detailed product information, please contact us.

