Knowledge

Pressure plates can be categorized by function, such as anti-slip plates and insulating pressure plates. Their design must match the rail type and loa

A fishplate, also called a joint bar, is the steel plate bolted across the webs of two adjoining rails to make a rail joint. It transmits bending and

Bolts are key components of the track fastening system; their strength grade and tightening torque directly affect connection reliability. Appropriate

Rail pads sit between the rail foot and the sleeper or track slab, and their classification follows both material and function. Rubber pads offer low

As a core component of the fastening system, the performance of the spring clip depends on high-quality materials and precise manufacturing processes.

National standard and international standard rails differ significantly in dimensional parameters, material properties, and compatibility systems, dir

Rail pads are elastic polyurethane mats which are interposed between steel rails and railway sleepers to protect the sleeper top from wearing and impa

What is the difference between rail rubber pads and rail clips? Rail Pads (track pads) and Rail Clips (rail elastic clips / fastening clips) are core

The elastic rail pad sits between the rail foot and the sleeper to absorb impact, damp vibration and provide electrical insulation, and its material d

Rail pads cushion the wheel load, protect the sleeper and insulate the track circuit, so their quality has to be verified by test rather than by appea

Rail pads are elastic polyurethane mats which are interposed between steel rails and railway sleepers to protect the sleeper top from wearing and impa

The rail pad , or called rail elastic pad, refers to a pad made of rubber or plastic, which is installed between the rail and the concrete under-rail